Ford · Transit · Mk8 2016–present
The Ford Transit EcoBlue is the UK's best-selling van — and one of the most popular economy remaps we carry out. More power, better fuel economy and stronger performance when loaded or on motorway runs.
| Standard | Stage 1 | Stage 2 | |
|---|---|---|---|
| Power | 130hp | 170hp+40hp (+31%) | On request |
| Torque | 340Nm | 430Nm+90Nm (+26%) | On request |
| Engine | 2.0 EcoBlue TDCi · 1,995cc · Diesel | ||
| Warranty | Lifetime software warranty included | ||
Stage 1 & Stage 2
Ford's EcoBlue diesel is shared across Transit, Transit Custom and Transit Connect variants at different power outputs. The 130hp version runs the same hardware as the 185hp variant — the gap is purely software.
A Stage 1 remap on the Ford Transit requires no hardware modifications. Our specialist software recalibrates boost, fuelling and ignition timing within the engine’s safe limits, delivering instant, driveable gains you’ll feel from the first drive.
What Changes
We recalibrate boost, fuelling and injection timing on the EcoBlue. The result is +40hp and +90Nm — making a fully loaded van feel dramatically less strained, while most drivers also report improved MPG under normal driving conditions.
Factory boost is set conservatively. We raise it to the level the turbo and internals can comfortably sustain, unlocking power that was always there.
Fuel delivery is recalibrated to match the new boost levels precisely — giving a cleaner burn, better response and improved efficiency under light loads.
Timing is advanced where the engine can safely benefit, improving combustion efficiency and delivering more torque across the full rev range.
The factory throttle map is deliberately muted. We sharpen it so the car responds the moment you press the pedal — no lag, no hesitation.
Common Questions
Pricing depends on the specific variant and stage. Contact us for a quote — we’re competitively priced and include a lifetime software warranty on every remap. Call 01792 732 062 or fill in the booking form.
A quality remap modifies the ECU’s calibration data rather than adding any external hardware. While a dealership with specialist equipment could detect a changed map, it leaves no physical trace and does not trigger warning lights.
Both options are available. Our workshop in Ammanford has a MAHA 4WD dyno for before/after verification. Our mobile technicians also cover the whole of South Wales and can come to your home or workplace.
Most drivers report 8–15% improvement in fuel economy under normal driving. The extra torque at lower revs means the engine works less hard, using less fuel for the same output.
Yes — the Transit Custom uses the same EcoBlue engine family and we remap it regularly. The same gains apply across the Custom, Transit Connect and Transit Courier variants.
Book Your Remap
Fill in the form and we’ll confirm within 24 hours. Lifetime software warranty included on every remap.
We’ll confirm within 24 hours.